• Penetrates and seals exterior below grade walls.
• Protects asphalt roofs from the hot sun and winter weather.
• Forms a smooth, tough, elastic film.
• Protects metal and wood below grade.
• Use as a bituminous roof primer.

VOC: 270 g/L MAX

‍

112 Roof Coating, Foundation Coating & Roof Primer may be applied on exterior below grade CMU block and masonry walls where no hydrostatic pressure is present. Use also on smooth surface built-up asphalt roofs (BUR), smooth or granule APP or SBS modified bitumen membrane roofs as well as metal roof surfaces and roll roofing. May also be used to protect wood and metal below grade.

‍

Weight per Gallon: 7.80
Solids by Weight: 70%
Solids by Volume: 64%
Weight per Gallon: 7.8 lbs.
Color: Black
Dry Time: 8 to 24 hours
Service Temp. Range: -40ºF to 180ºF

SURFACE PREPARATION:
All surfaces should be clean, dry and free from oil, grease, dust, dirt, loose paint or other foreign matter.

APPLICATION:
Apply with either a brush, roller, or heavy-duty airless spray equipment in a smooth continuous coat over the entire roof area. Coating should be continuous and free of pinholes or holidays. If not, apply a second application at right angles to the original coat. Allow at least 24 hours drying time between coats. Do not apply to wet, damp, or frost surfaces. Exterior use only. Cover air intakes during application and while drying.

COVERAGE RATE:
Foundations:  Apply to the foundation walls at the rate of 1 to 1.5 gallons per 100 sq. ft. Roofs:  Apply 1 to 2 gallons per 100 sq. ft. Primer:  Apply as a primer at the rate of 0.5 to 1 gallon per 100 sq. ft. Coverage rates may vary depending on the condition and porosity of the surface. DO NOT THIN.

Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying.