Seals and waterproofs
UV Stable – Can be left exposed (White, Black or Silver only)
Bonds to many different roof surfaces and substrates.
Easy release backing.
Wide service temperature performance range.
Bonds to fully-adhered solvent and acrylic based coatings and paints.
Self-Healing
VOC Free
Fleece Faced Karna-Bond may be coated.

560 KARNA-Bond is designed for sealing seams, flashing curbs and making repairs on metal roof surfaces, single ply roofs and many other building and roof surfaces. Ideal for sealing ductwork, trailers, mobile homes, trucks, gutters and skylights. Also has excellent adhesion for sealing to EPDM, Hypalon, and most PVC and TPO roof surfaces as well as to concrete, gypsum boards, plastic, glass, wood, asphalt, Plexiglas and most other common building materials. Its ease of use allows for quick repair installations. 560 KARNA-Bond Double-Sided is designed for bonding and sealing metal structures as well as offering a degree of vibration dampening. Use to bond seams of single ply roof membranes and in creating seals for abutting and fastening mechanical equipment.

‍
Note: Not intended for Asphaltic Surfaces.

Appearance: Gray sealant (Double-Sided) or gray sealant with either a thin aluminum film (White, Black, Silver) or White Fleece
Thickness: 30 mils (+/- 2 mils) Double-Sided and Fleece only 20 mils (+/-2 mils) Silver, White, and Black only
Bonding Time: Immediate, full bond within 24 hours
Peel Adhesion 90º: 17 lbs. ASTM D 1000
Application Temp: 32ºF to 115ºF
Service Temp: -40ºF to 210ºF

SURFACE PREPARATION:
All surfaces to be sealed should be dry, smooth, clean and free from dirt, dust, oxidized carbon dust, loose paint or coatings, oil, grease, rust, or other foreign matter. Recommended application temperature is 32°F to 120°F. Clean single ply membrane surfaces with toluene, xylene, acetone or single ply manufacturer’s primer or splice wash. Clean metal with similar solvent or 799 Wash-N-Prep and water. Follow instructions and SDS safety precautions of primer, wash or solvent manufacturer carefully when using.

APPLICATION:
After surface has been properly prepared, cut desired length of 560 KARNA-Bond. Remove silicone release liner and position over desired area. Apply the tape directly to the area exactly the first time. Trying to remove may damage the tape and roofing surface. Press down firmly with a cloth pad, finger pressure or roller making sure tape stays conforming to the roof surface as you smooth out on to the surface. Edges should be free of fishmouths and tunnels. 560 KARNA-Bond Fleece should be coated over immediately. 560 KARNA-Bond Double-Sided is not meant to be exposed directly to the environment.

Do not apply when rain is imminent. Protect from freezing. Store in a heated room and keep rolls covered when not in use. Dispose of in an environmentally safe manner. For exterior use only.