FEATURES AND BENEFITS
- Rubberized - elastomeric
- Wet or dry application
- Improved low-temperature flexibility
- Improved water and weather resistance
- Will not shrink or crack
- Smooth, easy to apply rubber-like trowel consistency
- Excellent adhesion
- Excellent resistance to flow (sag) at high roof
temperatures
- Ready to apply - no mixing required
- Greater strength
- VOC compliant
- ASTM compliant
PHYSICAL PROPERTIES
Consistency: A smooth rubber-like
trowel consistency which will readily spread on and adhere to
vertical and horizontal surfaces without sagging.
Character of Dried Film: Excellent
adhesion to masonry, steel, cured concrete, shingles, asphalt
roofing, skylight flashings and a variety of other surfaces.
Film Performance Characteristics:
The dried film retains its elasticity and ductility so that the
material will resist extreme variations in temperature and weather.
Sag Resistance: Excellent resistance
to flow at high roof temperatures on vertical surfaces.
Homogenized: Thoroughly mixed
and consistent throughout.
USESKarnak
#19 Ultra Flashing Cement is a general purpose flashing cement for
repairing leaks in shingles, concrete, metal or asphalt roofs, flashings
on walls, chimneys, flues, skylight flashings, downspouts and cornices.
19 Ultra is excellent for sealing cracks in concrete and brick,
as a joint filler for precast roof slabs and for general purpose
use in maintenance of exposed buildings and structures.
SPECIFICATIONS
- ASTM D-4586 Type I
- ASTM D-3409
- Fed Spec SS-C-153 Type 1
SURFACE PREPARATIONAll
surfaces should be clean, dry and free from oil, grease, dust, dirt,
loose paint or other foreign matter. Excess water should be removed,
if possible, before application of #19 Ultra.
APPLICATIONSpread
Karnak #19 Ultra Flashing Cement to an average thickness of 1/8"
(approximately 8 gallons per square) and press tightly into joints,
seams or cracks.
TO REPAIR CRACKS, BREAKS AND BLISTERS
- Spread Karnak #19 Ultra Flashing Cement over
the damaged area at an average thickness of 1/8".
- Embed Karnak Cotton, Glass or Polyester Membrane
reinforcement in the #19 Ultra Flashing Cement.
- Apply an additional coat of Karnak #19 Ultra
Flashing Cement over the entire patch at an average thickness
of 1/8".
CARE OF TOOLSTools
and other equipment should be thoroughly cleaned with mineral spirits,
taking necessary precautions when handling combustible materials.
To clean hands use #709 Karnak Karna-Klean or a waterless hand cleaner.
CAUTIONCombustible
Mixture: do not use near open flame. Avoid breathing solvent fumes
and prolonged contact with skin. Do not take internally. If swallowed,
do not induce vomiting. Call a physical immediately.
Keep out of reach of children. Keep container covered
when not in use. Do not thin. Consult MSDS for further safety precautions.
Dispose of in an environmentally safe manner.
PACKAGINGAvailable
in 3 gallon buckets and 5 gallon pails.
|
