| 
DESCRIPTION
Karnak #18AF Perfectseal Plastic Cement is a scientifically compounded
composition of selected asphalts, mineral fibers, and refined solvents
that are manufactured to a heavy consistency. Designed for application
by trowel #18AF is a durable, elastic cement with excellent adhesion
and weathering characteristics . This product when applied dries
to a tough, flexible, water resistant and corrosion proof coating
that provides excellent performance over a wide range of temperature
and weather conditions.
|
| PHYSICAL
PROPERTIES
- Consistency: A smooth, heavy trowel consistency which will readily
spread on and adhere to all surfaces without sagging.
- Character of Dried Film: Uniform, excellent adhesion to masonry,
steel, cured concrete, shingles, asphalt roofing and a variety
of other surfaces.
- Has excellent resistance to flow at high temperatures when used
on a vertical surface.
SPECIFICATION
- ASTM D-4586, Type I ( Free)
- VOC Content = 300 grams per liter
USESKarnak
#18AF Perfectseal Plastic Cement is a general purpose cement for
repairing leaks in shingles, concrete, metal or asphalt roofs, flashings
on walls, chimneys, flues, down-spouts and cornices. Excellent for
sealing cracks in concrete, brick, as a joint filler forpre-cast
roof slabs and general purpose use in maintenance of exposed buildings
and structures.
SURFACE PREPARATIONAll
surfaces should be clean, dry and free from oil or grease, dust,
dirt, loose paint or other foreign matter prior to application.
APPLICATIONSpread
Karnak #18AF Perfectseal Plastic Cement to an average thickness
of 1/8" (approximately 8 gallons per square) and press tightly
into joints, seams or cracks. To repair large cracks, breaks and
blisters, spread Karnak #18AF Perfectseal Plastic Cement over the
damaged area, then embed Karnak Cotton, Glass or Poly-Mat Membrane
reinforcement and then apply another coat of Karnak #18AF Perfectseal
Plastic Cement over the entire patch.
CARE OF TOOLS
Tools and other equipment should be thoroughly cleaned with mineral
spirits, taking necessary precautions when handling combustible
materials.
CAUTIONDo
not use near heat or open flame. Avoid breathing solvent fumes and
prolonged contact with skin. Do not take internally. If swallowed,
do not induce vomiting. Call a physician immediately. Keep out of
reach of children. Keep container covered when not in use. Do not
thin. Dispose of in an environmentally safe manner. Avoid getting
in eyes. Use only with adequate ventilation.
FIRST AIDRemove
to fresh air. Call a physician. If unconscious, give artificial
respiration. If splashed in eyes, flush immediately with abundant
quantities of running water. Read Material Safety Data Sheet before
using this product.
PACKAGINGAvailable
in 5 gallon pails.
|
