SPECIFICATION

N/A

USESKarnak #89 Sta-Tack Primer is designed for use as a primer prior to the installation of self-adhering membranes. This thin solution readily penetrates pores and dries fast to provide a tacky, firm substrate for adhesion of the membranes. Karnak #89 Sta-Tack Primer is suitable for use over asphalt, wood, plywood, gypsum board, concrete and metal surfaces.

SURFACE PREPARATIONAll surfaces to be primed must be dry and free from dirt, dust, oil, grease and any other foreign matter.

APPLICATIONEasily applied by brush or hand sprayer at the rate of 0.20 (1/5th gallon) gallon per 100 sq. ft.(500 sq.ft. per gallon).

COVERAGEApply at the rate of 0.20 gallon per 100 sq.ft. (500 sq.ft. per gallon).

CARE OF TOOLSUncured material may be cleaned with water. Cured material may be cleaned with Karna-Klean, mineral spirits or similar solvent.

CAUTIONDo not aplpy when rain is imminent. Protect from freezing. Primer must be dried before exposure to water. Store between 50 deg. F and 100 deg. F. Keep container closed when not in use. Do not thin. Keep out of reach of children. Do not take internally. Harmful if swallowed. Avoid contact with eyes and skin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying.

PACKAGINGAvailable in 1 gallon cans and 5 gallon pails.