USESKarnak #505P Primer should be used as a primer with the following Karnak Elastomeric products: Karnak #501 Elasto-Brite and Karnak #505 Elasto Brite-M. Karnak #505P Primer is suitable for use over metal, wood, cinderblock, concrete block, brick and stucco.

APPLICATION

• Easy to apply.
• Quick Dry.
• Tough, adhesive, chemical resistant, durable film.
• Excellent adhesion.
• Will tie up loose dust.
• Used as is, needs no intermixing.

SURFACE PREPARATIONAll surfaces to be treated with Karnak #505P Primer must be clean, dry and free from dirt, dust, rust, grease and oil.

APPLICATIONKarnak #505P Primer may be applied by brush, roller or spray.

COVERAGE RATEApply at the rate of 0.5 to 0.75 gallon per 100 sq. ft.

CARE OF TOOLSTools may be cleaned with water or Karnak-Klean.

COLORSBlue

CAUTIONDo not apply when rain is imminent. Protect from freezing. Coating must be dried before exposure to water. Store in a heated room and keep container covered when not in use. Do not thin. Avoid prolonged contact with skin. Dispose of in an environmentally safe manner.

PACKAGINGAvailable in 1 gallon pails and 5 gallon pails.