SURFACE PREPARATIONAll surfaces should be swept clean of all dust, dirt or loose particles. Repair all blisters, breaks and cracks with Karnak 19 ULTRA Rubberized Flashing Cement and Karnak #34 Asphalt Saturated Cotton Fabric or Karnak #31 Fiberglass Membrane.

APPLICATIONKarnak #107 velvet Roof Coating is easily applied by brush, roller or spray equipment.

BRUSH APPLICATION: Karnak #107 Velvet Roof Coating is easily applied with a wide, fiber roof brush. Apply at the rate of 1 to 2 gallons per 100 sq. ft.

SPRAY APPLICATION: Karnak #107 Velvet Roof Coating can be sprayed efficiently on large areas with airless spray equipment. Apply at the rate of 1 to 2 gallons per 100 sq. ft.

COVERAGE RATEApply at the rate of 1 to 2 gallons per 100 sq. ft.

CARE OF TOOLSTools and other equipment should be thoroughly cleaned with mineral spirits, taking necessary precautions when handling combustible material.

CAUTIONDo not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying.

COLD-PROCESS SYSTEMS AND COATINGS, EITHER EMULSION OR SOLVENT BASED, SHOULD ONLY BE INSTALLED ON DECKS WITH POSITIVE DRAINAGE.

PER NRCA, (NATIONAL ROOFING CONTRACTORS ASSOCIATION) "THE CRITERIA FOR JUDGING PROPER SLOPE FOR DRAINAGE IS THAT THERE BE NO EVIDENCE OF STANDING WATER ON THE DECK 48 HOURS AFTER IS STOPS RAINING."

PACKAGINGAvailable in 5 gallon pails and 55 gallon drums.