Contact Homepage
Company
Products
Energy Star Products
Project Profiles
FAQs
MSDS
Specification & Codes
Partners & Links
Sign-up
Technical Bulletins
Educational Services
 


DESCRIPTION
Karnak #66AF Modified Bitumen Adhesive is a COLD-APPLIED, SBS POLYMER MODIFIED ASPHALT ADHESIVE, that provides great adhesive and elongation properties. Karnak #66AF Modified Bitumen Adhesive is available in brush and trowel grades.

 

 
 

USESKarnak #66AF Brush-Grade is used to adhere SBS modified bitumen membranes, base and ply sheets. Karnak #66AF Modified Bitumen Adhesive can also be utilized to adhere conventional BUR ply sheets or fully granulated cap sheets.

Karnak #66AF Trowel-Grade can be used to make repairs on existing modified applications and flashings on vertical surfaces, i.e. skylights, vents and pipes.

SPECIFICATION

  • ASTM D-3019 Type III

SURFACE PREPARATIONAll surfaces should be free from oil, grease, dirt and loose materials. All BUR surfaces should be patched and repaired with Karnak 19 ULTRA Rubberized Flashing Cement and Karnak #31 Glass Membrane. Metal surfaces must have all rust and scales removed.

ADVANTAGES

  • Easy to apply.
  • Excellent cure.
  • Tough, flexible, adhesive and cohesive film.
  • Excellent water and weather resistance.
  • Excellent general adhesive.
  • Excellent lap cement.
  • Good U.V. resistance.
  • Complies with current VOC regulations.
  • Elastomeric, moves with substrate.

APPLICATIONApply Karnak #66AF Modified Bitumen Adhesive at a rate of approximately 1 gallon per 100 square feet on horizontal and vertical surfaces; irregular surfaces may require slightly more material. Karnak #66AF Modified Bitumen Adhesive may be applied by squeegee, roller, brush or trowel.

COVERAGE RATEApply Karnak #66AF Modified Bitumen Adhesive at the rate of 1 gallon per 100 sq. ft.. On porous or irregular surfaces, 2 gallons per 100 sq. ft. may be required.

PHYSICAL PROPERTIES

  • Weight per Gallon: 8.65
  • Shear Strength: 18 lbs. / sq. in.
  • Peel Strength: 10 lbs./lin. in.
  • Elongation: 200%
  • Recovery: 80%
  • Cure Time: 24 to 48 hours @ 77°F
  • Application Temperatures: 40°F to 100°F

CARE OF TOOLSEquipment may be thoroughly cleaned after use with mineral spirits, taking necessary precaution when handling combustible materials.

CAUTIONDo not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Excessive application may create blistering. Application at temperatures below 40°F may take longer to cure. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Cover air intakes during application and while drying.

PACKAGINGAvailable in 5 gallon pails.

Home
MSDS
Search
FAQs
Company Info
Email Us
Contact
 
Search
Roof Products
Reflective Coatings
Asphalt Roof Coatings
Adhesives
Re-Saturants
Primers
Repair Mastics
Restoration & Reroofing
Dampproofing
Waterproofing
Fabrics & Repair Tapes
Caulking, Sealants & Flooring
Other Products

© 2003, Karnak Corporation.