ADVANTAGESKarnak #105 Tac-Kote penetrates capillaries to bind and seal dusty surfaces to provide the correct base for subsequent toppings.

SPECIFICATION

• ASTM D-2028 RC-250
• AASHTO M-81

SURFACE PREPARATIONSurfaces to be treated with Karnak #105 Tac-Kote should be oil and moisture free in order to assure proper penetration.

APPLICATIONKarnak #105 Tac-Kote is easily applied by brush, squeegee or spray. Apply at the rate of 1 to 1 1/2 gallons per 100 sq. ft.. Actual rate may vary due to the nature of the substrate.

COVERAGEApply at the rate of 1 to 1 1/2 gallons per 100 sq. ft..

CAUTIONDo not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner.

CARE OF TOOLSSpray equipment, brushes and other tools may be cleaned, and the dried asphalt film removed with mineral spirits.

PACKAGINGAvailable in 5 gallon pails and 55 gallon drums.